====== Adjust the proximity sensor position ======

1. Use a 2.5mmL wrench to loosen the screw.\\ {{ :tina2:图片40.png?nolink&800 }}\\ 2. Adjust the approach height and tighten the screw. {{ :tina2:图片41.png?nolink&800 }}\\ 3. Z-offset is required after installation.\\ {{ :tina2:图片39.png?nolink&400 }} \\ \\ \\ ====== Replace the proximity sensor ====== 1. Use a 2.5mmL wrench to loosen the screw.\\ {{ :tina2:图片40.png?nolink&800 }}\\ 2. Cut off the ties and untie the black wrapping cloth.\\ {{ :tina2:图片9.png?nolink&800 }}\\ 3. Unplug the plug and remove the proximity sensor.\\ {{ :tina2:图片42.png?nolink&800 }}\\ 4. Replace and install a new proximity sensor and adjust the Z-offset.\\ {{ :tina2:图片39.png?nolink&400 }}\\