====== Installation on MacOS ====== \\ Decompress installer. Double-click package, drag Cura to Applications.\\ {{ :tina2:pasted:01.png?direct&400 }}\\ {{ :tina2:pasted:02.png?direct&400 }}\\ \\ If you encounter an error message,\\ {{ :tina2:pasted:03.png?direct&400 }}\\ \\ open the "Terminal" and execute this command:sudo spctl –master-disable , then enter your computer password.\\ {{ :tina2:pasted:04.png?direct&400 }}\\ {{ :tina2:pasted:05.png?direct&400 }}\\ \\ Open "System Preferences" - "Security & Privacy", navigate to the "General" tab, and check "Anywhere".\\ {{ :tina2:pasted:06.png?direct&400 }}\\ {{ :tina2:pasted:07.png?direct&400 }}\\ \\ Then, reopen the "Terminal" and execute this command:sudo xattr -dr com.apple.quarantine /Applications/Ultimaker-Cura-eww.app\\ {{ :tina2:pasted:08.png?direct&400 }}\\ \\ After that, you should be able to open Cura without any issues.\\ {{ :tina2:pasted:09.png?direct&400 }}\\ \\ \\ \\ ====== How to configure Ultimaker Cura ====== \\ Add the configuration file of the corresponding model in the official open source version of ultimaker, and then you can select the model to use in the interface.\\ It should be noted that some functions cannot be used, specifically: the usb connection cannot be used, and the information displayed by clicking the print file is only the layer and high level information.\\ Cura-5.6.0:{{:wiki:3d_printer.zip|3d_printer.zip}} \\ ===== Windows - configuration method ===== 1.Download the compressed package and unzip it.\\ {{ :wiki:qq截图20240429140241.png?direct&200 }}{{ :wiki:qq截图20240429140322.png?direct&400 }}\\ 2..Right click the cura icon and select “Open file location”.\\ {{ :wiki:qq截图20240429135300.png?direct&600 }}\\ 3.open in sequence “share→cura→resources:”\\ {{ :wiki:1.png?direct&600 }}\\ 4.Open the "definitions" folder and copy all the files in "definitions" in "tina2-resources" to this folder.\\ {{ :wiki:2.png?direct&600 }}\\ {{ :wiki:7.png?direct&600 }}\\ 5.Open the "extruders" folder and copy all the files in "extruders" in "tina2-resources" to this folder.\\ {{ :wiki:4.png?direct&600 }}\\ {{ :wiki:6.png?direct&600 }}\\ 6.Open "Cura". Select the "ENTINA-TINA2S".\\ {{ :wiki:10.png?direct&600 }}\\ {{ :wiki:11.png?direct&600 }}\\ {{ :wiki:12.png?direct&600 }}\\ {{ :wiki:qq截图20240429154317.png?direct&600 }}\\ ===== Mac Os - configuration method ===== 1.Right-click the cura icon and select "Show Package Contents", open "Contents" → "Resources" → "share" → "cura" → "resources":\\ {{ :wiki:15.png?direct&600 }}\\ 2.The other steps are the same as Windows, copy “definitions” and “extruders” into a folder with the same name. // //