====== 4.COMMON MENU OPERATIONS ======

====== 4.COMMON MENU OPERATIONS ======

==== Print from TF Card ====

Open Main Menu, select "Print From TF"

Turn knob to select file, press knob to start print.

==== Print Multi-Color Models / Change Filament During Print ====

Same steps as Change Filament in Prepare menu:

Heat to set temp.Auto-unload at temp.

 

Beep, insert new filament, press knob.Auto-load at temp.

==== Adjust Temperature During Print ====

During print, press knob for print settings menu, select Tune > Nozzle
to adjust temp:

Turn knob to increase/decrease temp.

Press knob to return.

 

==== Adjust Z Offset During Print ====

During print, press knob for print settings menu, select Tune > Probe Z
Offset to fine-tune nozzle-platform gap:

Turn knob to micro-adjust gap.

 

**ALLOWS REAL-TIME Z-AXIS ADJUSTMENT TO CHANGE GAP DURING PRINT:**

**INCREASE BY 0.2MM IF GAP TOO SMALL (NO EXTRUSION)**

**GRADUALLY DECREASE IF GAP TOO LARGE (POOR ADHESION)**