Replace the proximity switch

operating steps

Turn off the machine (graph 37)

                                   graph 37

Pull line line (graph 38)

                                   graph 38

Remove 4 screws fixing the housing (graph 39,40,41,42)

                                   graph 39

                                   graph 40

                                   graph 41

                                   graph 42

Remove the cover and note the internal wiring of the nozzle cover (graph 43)

                                   graph 43

Pull off the proximity switch socket (graph 44)

                                   graph 44

Remove the 2 screws fixing the proximity switch (graph 45,46)

                                   graph 45

                                   graph 46

Remove the old proximity switch (graph 47)

                                   graph 47

Install a new proximity switch (graph 48)

                                   graph 48

Point the new proximity switch red at the hole, two arrows (graph 49,50)

                                   graph 49

                                   graph 50

Top the new proximity switch to the top (graph 51)

                                   graph 51

Install the screws are fixed (graph 52,53)

                                   graph 52

                                   graph 53

Connect the proximity switch line (graph 54)

                                   graph 54

Install the housing case (graph 55)

                                   graph 55

Install the housing fixing screws (Fig. 56,57,58,59)

                                   graph 56

                                   graph 57

                                   graph 58

                                   graph 59

Connecting line (graph 60)

                                   graph 60

Power-up (graph 61)

                                   graph 61

Adjust the Z bias (graph 62)

                                   graph 62