PoloPrint Wiki
https://wiki.poloprint.net/
2026-04-22T10:35:14+00:00PoloPrint Wiki
https://wiki.poloprint.net/
https://wiki.poloprint.net/lib/tpl/readthedokus/images/favicon.icotext/html2024-05-22T07:21:11+00:00Anonymous (anonymous@undisclosed.example.com)2.2app-configure_and_add
https://wiki.poloprint.net/2.2app-configure_and_add?rev=1716362471&do=diff
text/html2024-05-22T07:22:23+00:00Anonymous (anonymous@undisclosed.example.com)3.1print_more_models
https://wiki.poloprint.net/3.1print_more_models?rev=1716362543&do=diff
text/html2024-05-22T07:23:16+00:00Anonymous (anonymous@undisclosed.example.com)3.2wiibuilder-install
https://wiki.poloprint.net/3.2wiibuilder-install?rev=1716362596&do=diff
text/html2024-05-22T07:31:01+00:00Anonymous (anonymous@undisclosed.example.com)3.3wiibuilder-parameters_and_slice
https://wiki.poloprint.net/3.3wiibuilder-parameters_and_slice?rev=1716363061&do=diff
text/html2024-05-22T07:32:40+00:00Anonymous (anonymous@undisclosed.example.com)3.4wiibuilder-tfcard_printing
https://wiki.poloprint.net/3.4wiibuilder-tfcard_printing?rev=1716363160&do=diff
text/html2024-05-22T07:34:43+00:00Anonymous (anonymous@undisclosed.example.com)3.5wiibuilder-wifi_printing
https://wiki.poloprint.net/3.5wiibuilder-wifi_printing?rev=1716363283&do=diff
text/html2024-05-22T07:35:39+00:00Anonymous (anonymous@undisclosed.example.com)3.6wiibuilder-usb_printing
https://wiki.poloprint.net/3.6wiibuilder-usb_printing?rev=1716363339&do=diff
text/html2024-05-22T07:36:40+00:00Anonymous (anonymous@undisclosed.example.com)4.1device-hotend
https://wiki.poloprint.net/4.1device-hotend?rev=1716363400&do=diff
text/html2024-05-22T03:06:36+00:00Anonymous (anonymous@undisclosed.example.com)4.2device-proximity_sensor
https://wiki.poloprint.net/4.2device-proximity_sensor?rev=1716347196&do=diff
text/html2024-05-22T07:37:33+00:00Anonymous (anonymous@undisclosed.example.com)4.3device-fan
https://wiki.poloprint.net/4.3device-fan?rev=1716363453&do=diff
text/html2024-05-22T07:39:00+00:00Anonymous (anonymous@undisclosed.example.com)4.4device-machine_maintenance
https://wiki.poloprint.net/4.4device-machine_maintenance?rev=1716363540&do=diff
text/html2024-05-22T07:46:08+00:00Anonymous (anonymous@undisclosed.example.com)4.6device-platform
https://wiki.poloprint.net/4.6device-platform?rev=1716363968&do=diff
text/html2024-05-22T07:47:24+00:00Anonymous (anonymous@undisclosed.example.com)5.1cura-install
https://wiki.poloprint.net/5.1cura-install?rev=1716364044&do=diff
text/html2024-05-22T07:53:46+00:00Anonymous (anonymous@undisclosed.example.com)5.2cura-configuration
https://wiki.poloprint.net/5.2cura-configuration?rev=1716364426&do=diff
How to configure Ultimaker Cura
Add the configuration file of the corresponding model in the official open source version of ultimaker, and then you can select the model to use in the interface.
It should be noted that some functions cannot be used, specifically: the usb connection cannot be used, and the information displayed by clicking the print file is only the layer and high level information.text/html2024-05-22T07:57:28+00:00Anonymous (anonymous@undisclosed.example.com)5.3parameters
https://wiki.poloprint.net/5.3parameters?rev=1716364648&do=diff
text/html2024-05-22T07:58:21+00:00Anonymous (anonymous@undisclosed.example.com)5.4cura-tfcard_printing
https://wiki.poloprint.net/5.4cura-tfcard_printing?rev=1716364701&do=diff
text/html2024-05-22T08:05:46+00:00Anonymous (anonymous@undisclosed.example.com)5.5cura-wifi_printing
https://wiki.poloprint.net/5.5cura-wifi_printing?rev=1716365146&do=diff
text/html2024-05-22T08:06:55+00:00Anonymous (anonymous@undisclosed.example.com)5.6cura-usb_printing
https://wiki.poloprint.net/5.6cura-usb_printing?rev=1716365215&do=diff
text/html2024-08-13T07:05:30+00:00Anonymous (anonymous@undisclosed.example.com)a-motor
https://wiki.poloprint.net/a-motor?rev=1723532730&do=diff
The casing of Motor A is loose.
Motor A (the extruder motor) is located at this position on the mainboard. Reinsert the motor casing by unplugging and plugging it back into the mainboard.text/html2024-07-18T07:30:18+00:00Anonymous (anonymous@undisclosed.example.com)adjust-the-height-of-the-proximity-sensor
https://wiki.poloprint.net/adjust-the-height-of-the-proximity-sensor?rev=1721287818&do=diff
Adjust the proximity sensor position
1. Use a 2.5mmL wrench to loosen the screw.
2. Adjust the approach height and tighten the screw.
3. Z-offset is required after installation.
Replace the proximity sensor
1. Use a 2.5mmL wrench to loosen the screw.text/html2024-07-18T07:56:40+00:00Anonymous (anonymous@undisclosed.example.com)belt
https://wiki.poloprint.net/belt?rev=1721289400&do=diff
Belt
Determine which direction the belt has a problem.
Y-Belt
Tighten the belt manually.
1. Use a 2.0mm wrench to loosen the 4 platform screws.
2. Press the motor firmly with your hand and tighten the 4 screws.
X-Belttext/html2024-05-22T08:24:49+00:00Anonymous (anonymous@undisclosed.example.com)changing_model_color
https://wiki.poloprint.net/changing_model_color?rev=1716366289&do=diff
text/html2024-05-22T08:25:40+00:00Anonymous (anonymous@undisclosed.example.com)check_endstops
https://wiki.poloprint.net/check_endstops?rev=1716366340&do=diff
text/html2024-07-30T03:45:04+00:00Anonymous (anonymous@undisclosed.example.com)clean_nozzle
https://wiki.poloprint.net/clean_nozzle?rev=1722311104&do=diff
Clean the nozzle
Clean the nozzle witch wrench
There are filament residues inside the throat, causing insufficient heating and preventing filament melting, which leads to filament jamming and inability to feed.
1.Unload filament.
2.Press tube fitting on both ends and remove the filament tube.text/html2024-08-01T02:09:28+00:00Anonymous (anonymous@undisclosed.example.com)extruder-tina2
https://wiki.poloprint.net/extruder-tina2?rev=1722478168&do=diff
Extruder handle is too tight - Tina2
1. Use a 2mm wrench to slightly loosen the screws on the extruder handle.
Extruder gear is loose - Tina2
1.Use a 2mm wrench to loosen the screw on the extruder handle and remove the handle.
2.Use a 2mm wrench to loosen the 3 screws on the extruder and remove the entire extruder.text/html2024-07-30T09:10:30+00:00Anonymous (anonymous@undisclosed.example.com)filament-is-not-inserted
https://wiki.poloprint.net/filament-is-not-inserted?rev=1722330630&do=diff
The filament is not inserted all the way.
If the filament is not fully inserted, the first layer of printing may be missing, leading to significantly reduced adhesion and print failures.
Please fully insert the filament into the nozzle.text/html2024-05-22T08:30:44+00:00Anonymous (anonymous@undisclosed.example.com)format_tf_card
https://wiki.poloprint.net/format_tf_card?rev=1716366644&do=diff
text/html2024-07-19T02:48:24+00:00Anonymous (anonymous@undisclosed.example.com)manage-the-filament
https://wiki.poloprint.net/manage-the-filament?rev=1721357304&do=diff
Manage the filamenttext/html2024-07-18T07:22:26+00:00Anonymous (anonymous@undisclosed.example.com)nozzle-clogged
https://wiki.poloprint.net/nozzle-clogged?rev=1721287346&do=diff
Clean nozzle with needle
Clean nozzle with wrench
When replacing the filament, if you pull it out directly, the filament will also stick to the nozzle and tube, causing blockage. Therefore, when we replace the filament, we need to use the “Unload the filamenttext/html2024-08-30T03:27:54+00:00Anonymous (anonymous@undisclosed.example.com)privacy
https://wiki.poloprint.net/privacy?rev=1724988474&do=diff
Privacy Policy
Jiangsu Wiiboox Technology Co. Ltd built the Poloprint Cloud app as a Free app. This SERVICE is provided by Jiangsu Wiiboox Technology Co. Ltd at no cost and is intended for use as is.
This page is used to inform visitors regarding our policies with the collection, use, and disclosure of Personal Information if anyone decided to use our Service.text/html2024-07-31T03:22:12+00:00Anonymous (anonymous@undisclosed.example.com)replace_fan_v10
https://wiki.poloprint.net/replace_fan_v10?rev=1722396132&do=diff
Replace fan - Tina2s V10
Perform the “Load filament” and wait until the nozzle temperature is higher than 50℃, then check whether the fan is rotating. If it does not rotate, it is a fan failure and needs to be replaced.
Replace fan - Tina2s V10text/html2024-05-22T08:32:33+00:00Anonymous (anonymous@undisclosed.example.com)replace_fan
https://wiki.poloprint.net/replace_fan?rev=1716366753&do=diff
text/html2024-05-22T08:33:41+00:00Anonymous (anonymous@undisclosed.example.com)replace_hotend
https://wiki.poloprint.net/replace_hotend?rev=1716366821&do=diff
text/html2024-07-11T06:05:29+00:00Anonymous (anonymous@undisclosed.example.com)replace_the_nozzle
https://wiki.poloprint.net/replace_the_nozzle?rev=1720677929&do=diff
text/html2024-07-31T03:21:09+00:00Anonymous (anonymous@undisclosed.example.com)replace-hotend-v10
https://wiki.poloprint.net/replace-hotend-v10?rev=1722396069&do=diff
Replace Hotend —Tina2s V10
There are impurities that are difficult to melt at the nozzle, which block the nozzle's thread outlet. The nozzle cannot be cleaned and the only option is to replace the hotend.
1. Unload the filament, wait for the temperature to cool down.text/html2024-07-09T02:28:33+00:00Anonymous (anonymous@undisclosed.example.com)sidebar
https://wiki.poloprint.net/sidebar?rev=1720492113&do=diff
Tina2 Serials
* Introduce
* Unpacking Guide
* User Manual
* Tina2 Plus
* Wifi Config
* Wifi Function
* Calibration
* Slicing Software
* Cura
* Firmware Update
* Octoprint
* Maintenance
* Filament
* FAQ
Starry Serials
* Introduce
* Unpacking Guide
* User Manual
* Wifi Config
* Slicing Software
* Maintenance
* FAQ
D120
* Introduce
* Unpacking Guide
* User Manual
* Wifi Config
* Wifi Function
* Calibration
* Slicing Software
* Firmware …text/html2024-05-16T00:48:31+00:00Anonymous (anonymous@undisclosed.example.com)start
https://wiki.poloprint.net/start?rev=1715820511&do=diff
Welcome to PoloPrint WIKI
Tina2 Serials
* Introduce
* Unpacking Guide
* User Manual
* Wifi Config
* Wifi Function
* Calibration
* Slicing Software
* Cura
* Firmware Update
* Octoprint
* Maintenance
* Filament
* FAQ
Starry Serials
* Introduce
* Unpacking Guide
* User Manual
* Wifi Config
* Slicing Software
* Maintenance
* FAQ
* How to configure Ultimaker Cura
D120
* Introduce
* Unpacking Guide
* User Manual
* Wifi Config
* Wifi Function
*…text/html2024-05-22T02:37:50+00:00Anonymous (anonymous@undisclosed.example.com)test2
https://wiki.poloprint.net/test2?rev=1716345470&do=diff
Installation on MacOS
Decompress installer. Double-click package, drag Cura to Applications.
If you encounter an error message,
open the “Terminal” and execute this command:sudo spctl –master-disable , then enter your computer password.text/html2024-11-14T07:59:33+00:00Anonymous (anonymous@undisclosed.example.com)testpage
https://wiki.poloprint.net/testpage?rev=1731571173&do=diff
tina2stext/html2024-08-13T06:37:27+00:00Anonymous (anonymous@undisclosed.example.com)trim-the-filament-or-tube
https://wiki.poloprint.net/trim-the-filament-or-tube?rev=1723531047&do=diff
The filament is stuck in the extruder or tube
The filament is stuck in the extruder
1. Cut the filament into a bevel and insert it into the extruder.
The filament tube is not inserted all the way; the filament is stuck between the tube and the extrudertext/html2024-07-11T06:03:05+00:00Anonymous (anonymous@undisclosed.example.com)v10_replace_fan
https://wiki.poloprint.net/v10_replace_fan?rev=1720677785&do=diff
text/html2024-05-14T03:36:44+00:00Anonymous (anonymous@undisclosed.example.com)videotest
https://wiki.poloprint.net/videotest?rev=1715657804&do=diff
text/html2024-08-22T06:42:58+00:00Anonymous (anonymous@undisclosed.example.com)x-homing-failed
https://wiki.poloprint.net/x-homing-failed?rev=1724308978&do=diff
X homing failed
Confirm the issue in the X direction
Please enter endstop troubleshooting.
1. Check the “endstop“
2.Press the X endstop manually and observe if the “Off-On” status is displayed correctly. If it does not display normally, it indicates an issue with the X direction.text/html2024-08-22T07:26:22+00:00Anonymous (anonymous@undisclosed.example.com)y-homing-failed
https://wiki.poloprint.net/y-homing-failed?rev=1724311582&do=diff
Y homing failed
Confirm the issue in the Y direction
Please enter endstop troubleshooting.
1. Check the “endstop“
2.Press the Y endstop manually and observe if the “Off-On” status is displayed correctly.
If it does not display normally, it indicates an issue with the Y direction.text/html2024-08-22T07:27:27+00:00Anonymous (anonymous@undisclosed.example.com)z-homing-failed
https://wiki.poloprint.net/z-homing-failed?rev=1724311647&do=diff
Z homing failed
Confirm the issue in the Z direction
Please enter endstop troubleshooting.
1. Check the “endstop“
2.Press the Z endstop manually and observe if the “Off-On” status is displayed correctly.
If it does not display normally, it indicates an issue with the Z direction.text/html2024-07-31T07:13:41+00:00Anonymous (anonymous@undisclosed.example.com)z-offset
https://wiki.poloprint.net/z-offset?rev=1722410021&do=diff
Adjust Z-offset -Tina2S V10
1. Click on "Z-Offset":
Locate the Z-Offset adjustment option in the printer's control panel.
You can adjust the distance between the nozzle and the platform by increasing or decreasing the Z-Offset. This is usually done in small increments, typically in millimeters.