Replace the extruder assembly

operating steps

Turn off the machine (graph 123)

                                                    graph 123

Disconnect line interface (graph 124)

                                                    graph 124

Remove extruder housing fixing screw (Fig. 125,126,127,128)

                                                    graph 125

                                                    graph 126

                                                    graph 127

                                                    graph 128

Remove the extruder housing (graph 129)

                                                    graph 129

Disconnect all line interfaces on the transfer board (graph 130)

                                                    graph 130

Remove screws (Fig. 131,132,133)

                                                    graph 131

                                                    graph 132

                                                    graph 133

Remove the extruder module (graph 134)

                                                    graph 134

Remove the extruder module fixing screws (graph 135,136,137)

                                                    graph 135

                                                    graph 136

                                                    graph 137

Tear off the tape (graph 138)

                                                    graph 138

Remove 2 fixing screws at the upper left and lower right of the fan (graph 139,140)

                                                    graph 139

                                                    graph 140

Remove the extruder module (graph 141)

                                                    graph 141

Remove the nozzle fixing screw (graph 142)

                                                    graph 142

Replace the new extruder module (graph 143)

                                                    graph 143

Install the nozzle (graph 144)

                                                    graph 144

Install fan (graph 145,146)

                                                    graph 145

                                                    graph 146

Paste adhesive tape (graph 147)

                                                    graph 147

Install the extruder fixing screws (Fig. 148,149,150)

                                                    graph 148

graph 149

                                                    graph 150

Install the screws (Fig. 151,152,153)

                                                    graph 151

                                                    graph 152

                                                    graph 153

According to the name of the socket on the transfer pad, link all lines on the nozzle transfer pad (graph 154)

                                                    graph 154

Installing the extruder housing (graph 155)

                                                    graph 155

Install extruder housing screws (graph 156,157,158,159)

                                                    graph 156

                                                    graph 157

                                                    graph 158

                                                    graph 159

Connect wiring (graph 160) and readjust Z bias (graph 160-1)

                                                    graph 160

                                                    graph 160-1